A wheelbarrow is a lot like a roto-tiller, it has a specific time and place for usefulness, and for the most part sits around unused until it’s needed. The wife brought into the marriage the one she’s had for 40 plus years, it has a wide barrow (tray) and just one solid wheel like most traditional ones have. Two steel bars make the handles, they wind down and around the tray underneath and are bolted to the frame that constitutes the ‘feet’ and support the wheel mechanism. When it was new it was a cheery red, now it’s a mottled rusted color with small patches of the original red peeking out from the patina.
It also is very worn down over the years. The wheel is somewhat cracked, there are two bolts sheared off on the underside and within the last two weeks the hollow steel bar that makes the right handle has finally rusted through and broken, just under the tailong edge of the barrow. Part is still supported by the bolts, and the other part sort of swings free. Getting it welded might be a bit of a chore, but the wife believed that there was a cheaper/easier way to accomplish this, with a product called ‘JB WELD‘. Granted it’s a substance that I’ve never used before, and a friend of mine informed me that it might work, but it won’t necessarily be as good a fix as someone spot welding the two pieces of metal together, either with a mig or tig weld. Since I know literally nothing about the ins and outs of welding, I’d have to find a place that did the work, and would be interested in fixing a 40 yr old wheelbarrow. Not the easiest task in the world, mind you.
From what I’ve been reading, the process is pretty straightforward. Get the pieces in line, clean up the rusty area and then mix and apply the product around and over where the break is. Then let it sit for four to six hours to cure. After that, it should be good to go. Having viewed a few YouTube videos, I can see that it will probably stand up to light use, but any heavy loads would end up probably breaking it all over again. So in the meantime, we’re shopping for a new wheelbarrow. Which has proven not to be the easiest thing either.
When I was growing up, my Dad had a pretty sturdy model, it was green, had oak handles and the tire was pneumatic, in other words, like a bicycle tire, it had an inner tube inside. Why I decided to part with it I have no clue, but probably because I was moving across the state and didn’t really have use for it anymore. So it got either sold, or left behind when we moved out of the parents’ house in 1992. I didn’t see any sign of it when I visited the property in 2017. So either it rusted out, or someone else is using it now.
With my birthday coming up, the wife has decided this is going to be my birthday present. But even though I’m likely to be using it mostly, it needs to be a design that she can easily use as well, and we’re not alike in terms of size, ability to lift and so on. So a traditional one-wheel model isn’t going to be sufficient, it needs to have a sizable (preferably steel) barrow, two wheels for stability and the ability to go over a curb or impediments without tipping over at an inopportune moment. Having looked over the wares the nearby Lowes had to offer, and searching on Amazon, its not as easy a prospect as I would have thought. Most of the ones on Amazon are similar to one another, the vast majority have poly or plastic barrows, and the wheels are either solid pieces or they’re not well supported underneath. There was even one that came directly from China that was going to take two MONTHS to arrive. Yeah, no thanks on that one.
I increasingly have a difficult time believing that this has to be as hard as its turning out to be. It’s a wheelbarrow for crying out loud. Reading the reviews of the ones people have bought, one is good for getting over obstacles, but the tray is made of flimsy plastic and under load bends and buckles. The next one has a steel tray, but the wheels are worthless and it doesn’t have an adequate support system to allow someone to believe it would last more than one season. Seriously? Our friends in North Carolina sent us a picture of the one they have, it looks quite nice and versatile, and using Google image search I was able to find the exact model….except that it’s only available in Canada. And they won’t ship it across the border, you have to drive to one of their stores in Toronto and purchase it.
Today I took a suggestion my wife had and ran with it. Her idea was going to the local Tractor Supply store, surely they would have several to choose from or at least look at. After work I drove over there and….nope. Not a one. I asked one of the clerks about the lack of wheelbarrows and he suggested I could order one online, have it shipped to the store and pick it up when it arrived next week. Thank goodness I don’t have a project I wanted to do today that required use of one. Sheesh.
I went to the online TSC site and that site insists there’s the right one in store. Unbelievable. I was just there! I guess I need to go back tomorrow and find someone that actually knows what they’re talking about. Oy.